Prices for mobile Internet in 3G and 4G networks have almost come down to earth from sky-high heights and will soon be expected to equal the cost of traditional cable communications. And then, you see, they will completely supplant it, because using the Internet, which you always have with you (in your cell phone), is much more convenient than being tied to its stationary source.

Switching from landline Internet to 3G/4G is a matter of a couple of minutes. It is enough to have an agreement with a cellular operator (access to the global web today is included in almost any tariff plan) and a certain amount on the balance sheet. Well, myself mobile phone, which will be the connection point.

Let's talk about how to connect the Internet to a computer using an Android smartphone as a modem.

Phone as a modem via USB cable

Connecting to the Internet through a phone connected to a computer via a USB cable is perhaps the easiest way. This method is convenient because it does not require settings and does not require measures to protect against hacking and unauthorized access, like wireless communication. The connection is established in a matter of seconds and works almost flawlessly, of course, provided there is a good cellular signal and a high-quality USB cable.

Procedure:

• Go to the Settings app (in older Android versions- “Settings”), open the wireless networks section, go to the additional settings for wireless networks (in my example, they are hidden behind the “More” button).

• Turn on “Mobile data”, that is, connect the phone to the 3G/4G Internet network. Or do it in another way - by pressing a button in the curtain, etc. On different Android smartphones, this and subsequent actions are performed slightly differently, but the essence is approximately the same.

• While in the advanced wireless settings, open the “Modem Mode” section. Move the “USB tethering” slider to the “Enabled” position.

The setup is complete and the connection is established. Your computer is now connected to the global network via a USB cable and the mobile operator's network.

Bluetooth modem on your phone

If you want to connect devices equipped with a bluetooth module (laptops, smartphones, tablets) to the network, you can use your phone as a bluetooth modem. To establish a stable connection, client devices should be located no further than 8-9 m from the phone, but best of all - in close proximity. Also, make sure that the Bluetooth adapter is activated on all devices.

The procedure for connecting to the Internet via a Bluetooth modem on your phone:

• Turn on 3G/4G Internet on your phone.
• Go to the Settings app - Wireless & Networks. Slide the Bluetooth slider to the On position.

• Go to the “Bluetooth” section and select from the “Available devices” list the device to which you want to provide access to the World Wide Web. If there are several of them, establish the connection one by one. When windows appear asking for permission to pair, check the code and click the “Connect” button on both devices to be connected.

• Open the “Modem Mode” section in the additional wireless network settings and turn on the Bluetooth modem.

Now your gadgets have access to the global network. By the way, you can simultaneously continue to use your phone as a modem connected to your computer via USB.

Creating a Wi-Fi hotspot on an Android phone

To connect the Internet to a laptop, tablet, smart TV and other devices that are located in different parts apartments, it is most convenient to use Wi-Fi. And our smartphone will again be the access point and modem.

The procedure for setting up an access point and connecting to the Internet:

• Turn on the Wi-Fi module and 3G/4G Internet on your phone.

• Go through the additional wireless network settings to the “Modem Mode” section. Tap the Wi-Fi hotspot line.

• In the “Wi-Fi Access Point” section, move the slider shown in the screenshot to the “Enabled” position. Before connecting devices to it, you need to make a few more settings.

• Tap the “Save access point” line. In the window that opens, select suitable option. To save battery energy, it is optimal to turn it off after 5 or 10 minutes of inactivity. If the phone is constantly connected to a power source, then the access point can be saved forever.

• The next setting is the network name, encryption method and password. The name (by default it usually repeats the name of the phone model) can be anything. The best way protection (encryption) - WPA2 PSK. If you are going to connect an old device, for example, a laptop with Windows XP, to this access point, choose WEP protection. Next, set a password that users will enter when connecting client devices, and save the setting.

• To communicate with devices equipped with a WPS button, you can use the same function on your phone. First, click WPS on the client device, then click the “Connect” button shown below on the phone.

After this, your gadgets will have access to the World Wide Web via Wi-Fi. By the way, if you wish, you can use all 3 types of connection together, but with a very intense load on the network modules, the phone will heat up (which is clearly not good for it) and, despite being powered from the computer via USB, it will quickly use up battery power. Therefore, it is still not worth loading it to the maximum. For such cases, it is better to use a traditional cable Internet connection.

Do you already have a laptop or are you just planning to buy one? Then it is advisable to think about connecting to the Internet, otherwise you will not be able to fully use the equipment. Downloading programs, updates, anti-virus databases, as well as movies and music is impossible without it. There are many ways to connect to the global network. Wired and wireless access is possible. Some of them do not require costs, while others require the purchase of auxiliary equipment. Let's look at how to connect a laptop to the Internet using all existing methods.

A modern laptop and a global network are one whole

Wired connection

Wired access is considered the most reliable and stable, and at the same time the least expensive. Just plug the cable into the connector on your laptop and make simple settings. Several technologies are used: optical cable and ADSL operating via telephone.

Cable

There are also several types of Internet connection. Each of them has slightly different settings.

Dynamic and static IP address

With a static IP, you need to enter the IP address, as well as the subnet mask, gateway and DNS server into the network card settings manually. With dynamic IP, all data is assigned by the operator, and you do not need to make additional settings.

A yellow sign should light up at the bottom of the screen when the cable is connected. Right-click and go to Network and Sharing Center - Change adapter settings. You will see an icon that says Ethernet or Local Area Network. Double click on the icon - Internet version 4 - Properties.

If the operator provides a dynamic address, specify automatic IP and DNS acquisition. When static, enter all the data specified in the contract. Click OK. Now the Internet will work and the yellow exclamation mark will disappear.

With this type, you only need to know your login and password. In the Network and Control Center, click on Create and configure a new connection - Internet connection - High-speed (with PPPoE). Type the username and password from the service agreement and come up with a name. If you enter all the data correctly, the connection will be established in a couple of seconds.

Subsequently, to connect, click on the network icon at the bottom of the screen and click “High-speed connection”. When using Windows 10, you will be redirected to the Dialer menu, where you can connect, change or delete the connection.

VPN over L2TP/PPTP

Some providers, for example, Beeline, connect their subscribers using VPN technology using the L2TP or PPTP standard. In the menu for creating a new connection, select Connect to a workplace - Use my Internet connection - Internet address, enter the data from the contract. Come up with a name, for example, the name of the provider, and click “Create”.

Now go to the menu for changing adapter parameters. Right-click on the name of your connection (the adapter will be called WAN miniport) - Properties - in “VPN Type” select the parameters recommended by the provider. We will connect from the networks menu by clicking on the name. If you have Windows 10, you will be redirected to the connection menu.

ADSL modem

ADSL access is not so popular. The signal comes from the telephone line, while the phone itself continues to work as usual. Connect the phone and modem to the splitter, which distributes the signal from the line, the modem with the second connector to the laptop, and then configure the connection on the computer. The procedure is no different from cable Internet.

The service provider will indicate over which connection it provides wired Internet. Most often this is static IP or PPPoE. Use the previous paragraph to configure the modem.

Wireless connection

To get wireless access, you need to purchase a Wi-Fi router. Plug it into a power outlet, plug the Internet cable into the designated connector (it always differs in color). Next, enter the wireless settings interface Wi-Fi networks or via cable. Information about login parameters is indicated on the router itself or in its instructions. Enter the IP address, login and password.

When you first connect, you will be prompted for a quick setup. Select your city and provider name and enter your connection details. If your provider is not in the list, check with them for the type of connection, select it in the network settings, enter the data, save and connect.

On your laptop, check for drivers for the Wi-Fi wireless module. This can be done through Device Manager. If the module works correctly, its name will be displayed in full. If the drivers are missing or installed incorrectly, there will be a yellow exclamation mark next to the name “Wireless Adapter”. You will need to download the driver for the Wi-Fi wireless module from the laptop manufacturer's website.

The Wi-Fi adapter must be turned on; it can be activated by pressing the key combination FN + F1–F12. More details can be found in the instructions for the laptop. In the right corner of the bottom of the screen you will see an Internet icon in the form of an antenna with a yellow star. Click on it, select your wireless network from the available connections, enter the password and click “Connect”.

mobile connection

When you do not have the opportunity to connect to a landline Internet, you can take advantage of the offer of mobile operators. The quality of these services is high level. In many cities, access speed is equal to home Internet. You can connect via a 3G modem, a mobile 3G router, and also use your phone as an access point.

3G modem

It looks like a flash drive into which a SIM card is inserted. When you connect for the first time, the system launches a program to set up the connection. If you purchased a modem from an operator’s official communication store, it will have a proprietary look and settings for working on the network of that particular company. With rare exceptions, you will not have to manually configure the settings. You will need to select a tariff, use the menu to activate the SIM card and the balance on it and connect. Subsequently, it will be enough to insert the modem into the laptop and click the “Connect” button in the program menu.

3G router

In terms of functionality, this is an ordinary router, but instead of a cable, a SIM card is inserted into it. Considering that most models have a built-in battery, you can distribute mobile Internet via Wi-Fi without being tied to a power cord. After inserting the SIM card, carry out the setup procedure as a regular router via the web interface.

Phone as access point

Another simple option is to use an Android or iOS phone as a modem. Just activate the item in the menu. You can read more about this method in our article “How to connect your tablet to the Internet.” However, please note that the phone's battery depletes very quickly. Therefore, it is advisable to connect it to a power source or connect it via USB.

Conclusion

Now you are familiar with all the ways to connect the Internet on your laptop. Setting it up via cable, Wi-Fi or modem is not difficult at all. All service providers try to make life as easy as possible for their users. Even if something doesn’t work out, you can call technical support.

What technology do you use to connect to the Internet? Share your experience in the comments.

Do you want to know how to consistently earn money online from 500 rubles a day?
Download my free book
=>>

On this moment Very often, mobile Internet is unreasonably expensive. In this regard, if you have high-speed Internet at home and a smartphone on the Android platform, you can connect via a USB cable.

But first you will need to carry out some manipulations with your personal computer. Also, if necessary, you need to find and install a special driver that is suitable specifically for your smartphone.

This must be done in order to. If it is already installed, then when you connect the phone to the computer, a system window will appear. In it, the user, if necessary, can view the files stored on the smartphone.

Having checked the availability of the necessary driver, we begin working with the PC:

1. First you need to go to “Local Area Connection”. As a rule, the icon for this system window is located in the lower right corner of the screen.
2. In the new system window, right-click on the current connection and go to “Properties”.
3. After that, select the “Access” section and mark the line where it says “Allow other network users to use the Internet connection.”

To solve the question of how to connect your phone to the Internet via a computer via a USB cable, you will need to install a special application, which in this case will act as a link between the mobile device and the PC.

Android Debug Bridge

Most simple option Connecting a mobile device to the Internet via a PC is installing Android Debug Bridge. After downloading, the program must be unzipped.

You will also need to enable debugging mode using a USB cable. To do this, you will need to become a smartphone developer. I’ll say right away that it’s not difficult.

To get developer rights on your smartphone you need:

1. Go to your phone settings and select the “About phone” or “Phone” section (it may have different names, since it all depends on the smartphone model).
2. Then look for the line where the build number is indicated, click on it 10 times.
3. After this, in the settings you will have a new section “Developer”, “For Developers” or “Developer Options”.

After this, you can activate USB debugging. Now let's return to the program itself. Once you unzip it, find and open the AndroidTool.exe file.

Then a new system window will appear in front of you, in it you need to click on “Refresh”. Next, select “Select DNS to use”, check “DNS” and click on “Connect”. As a result, a window with a running connection line will appear in front of you.

If the connection is correct, the “Connect Done” entry should appear in this window. This will mean that your personal computer can be used as your smartphone.

In this case, an entry may appear on the phone asking for rights for the user. Don't be alarmed, just click on "Allow" and that's it. It is noteworthy that in this case root rights are not required.

AndroidTool

To solve the question of how to connect your phone to the Internet via a computer via a USB cable, you can use the “AndroidTool” utility.

Also, there is very important point, in this case it is absolutely necessary. To do this, you will need to install the “Kingo Android Root” application on your personal computer.

After this you need to connect USB debugging mode to mobile device. You also need to enable permission to install applications from unknown sources.

Now we connect the smartphone via USB and turn on the previously installed application on the PC, which will independently install the required drivers on the phone.

Once the driver installation is complete, a red button with the word “Root” will appear. Click on it and wait for the work to finish. As soon as everything is finished, the program will ask you to reboot your smartphone.

Now you can safely install and work with the AndroidTool application. After launching it, in the “Android Reverse Terthering” window, click on the “Refresh” button.

Then find your device using the “Select a device” field. Next, select “DNS” and click on “Connect”. In the “Select DNS to use” list, open the “Progress” window.

The following message will appear: “Request for superuser “USB tunnel”. If you need to provide root rights, you need to click “Grant”. Thus, a message should appear stating that “Connection has been established.” After this, you can safely use the Internet.

Bottom line

If you are interested in how to connect your phone to the Internet via a computer via a USB cable, then, as you can see, it is not as difficult as it might seem at first glance.

In addition, this option is convenient in situations where... It is worth noting that this article presented applications that are popular among users. I wish you success!

P.S. I am attaching a screenshot of my earnings in affiliate programs. And I remind you that anyone can earn money this way, even a beginner! The main thing is to do it correctly, which means learning from those who are already making money, that is, from Internet business professionals.

Get a list of proven Affiliate Programs in 2017 that pay money!


Download the checklist and valuable bonuses for free
=>>

Internet - always and everywhere. At work, at home, at the dacha in the car and on a walk, we should always be up to date with the news. The Internet on our phone, which is always at hand, helps us with this.

Navigation

In order to connect to the Internet on a mobile phone, the tariff must support mobile Internet. As a rule, all tariffs of mobile operators support this function by default.

If you have not activated the service unlimited Internet, then you will be charged for Internet access.

Find out if your mobile phone supports parameters such as GPRS or WAP, i.e. Does the manufacturer provide for the possibility of using this cell phone model to connect to the Internet? To do this, read the instructions included with the phone or find it in the menu of the device itself.

Connecting to the Internet on a phone with the Android operating system

In order to access the Internet through a mobile operator:

• further section “Network”
• go to “Advanced settings”
• check the box “Mobile data enable access to data via mobile network”

You will see an icon at the top indicating an Internet connection. After that, go to the browser and use the Internet service.

There is another way, but it will work when you are within range of a Wi-Fi network:

• select the “Settings” section
• open the “Network” item
• in the Wi-Fi icon, move the slider to the right

Beeline Internet settings

To configure an access point:

• then click “More”
• find the “Mobile networks” section
• open the “Access points (APN)” tab

On different models phone names of menu items are different. You find the ones that make sense.

You need to fill out 4 points:

1. Name. In this paragraph, enter: beeline. Click “Ok”.
2. APN. Register your access point: internet.beeline.ru
3. Username. Specify: beeline
4. Password. Write: beeline

You can get automatic Internet settings by typing the USSD command *110*181# and pressing the “call” key. Next, simply save the configuration settings.

Internet setup Megafon

If you connected the Internet from Megafon, but for some reason the automatic settings did not arrive, you can make them manually:

• go to the “Settings” menu item
• open the “Wireless Connections and Networks” section
• then click “More”
• select the “Mobile networks” tab
• open the sub-item “Access points (APN)

If the list is empty, click the “+” icon in the upper right corner. Next you need to fill out 4 points:

1. Name. Specify: megafon
2. APN. Access point: internet
3. Username. Enter: gdata
4. Password: gdata

You can get automatic settings if you dial the USSD command *105*360# and challenge. And also through Personal Area on the company website.

Setting up Internet Tele 2

If you have connected the Internet from the Tele 2 company, all you have to do is make the settings on your phone:

• open the “Settings” menu item
• then click “More”
• go to the “Mobile networks” section
• select “Access Point”
• from the context menu select “Create access point”

The parameters of the new access point open. You only need to enter 2 points:

1. Name. Write: Tele2 internet
2. APN. Specify: internet.tele2.ru

Important! The “Username” and “Password” items remain empty.

To order automatic settings online, dial the number 679. Save and use the Internet service from Tele 2.

Setting up Internet Yota

If you use a SIM card from Yota and you need the Internet, then make the following settings for the access point:

1. Name: yota
2. APN you specify: yota.ru (in some cases: internet.yota)

Setting up mobile Internet on a smartphone with two SIM cards

The question often arises: how to set up mobile Internet on a Duos smartphone? It happens that the mobile Internet is connected, but there is no Internet access. You need to do the following:

• go to “Settings”
• select “SIM Card Manager”
• open “Data Network”

The settings may be specified, but the SIM card is simply not selected and, accordingly, the Internet does not work. Choose the SIM card through which you plan to access the Internet. You can change the SIM card to access the Internet at any time.

Internet booster for Android

To increase speed by Android smartphone You must use the Internet speed master program. This application works for both devices that have super user rights ( Root rights), and for those devices that do not have Root rights.

Consider a smartphone that has Root rights. Download the application via Google Play(app is free):

• launch the Internet Speed ​​Master application
• confirm the application's access to Root rights
• press the “APPLY PATH” button
• reboot your smartphone

After rebooting, the Internet connection speed will increase.

Let's consider an element of how this application works with devices that do not have Root rights:

• press the “IMPROVE INTERNET CONNECTION” button
• A message window appears in which you click “OK”

The strong impact of this application on Internet speed may not always be noticeable. There is another way you can use to speed up the loading of pages in your browser. One of the most popular browsers on Android is Chrome:

• launch the browser
• click on the three dots in the upper right corner
• Select “Settings” from the list
• open the “Traffic Saving” icon
• move the slider to the “On” state

Mobile Internet: useful about pleasant things

A smartphone with mobile Internet is a sheer pleasure, and 4 will help you extend it simple advice about how to simply and efficiently use the mobile Internet:

1. Tip 1. Control the life of your smartphone. Downloaded to smartphone mobile applications may periodically request updates. In order to manage the update, in the “Settings” menu, check the “Manual update” option. Thus, you choose for yourself what you need and what you don’t.
2. Tip 2. Watch Internet videos - also look at the traffic. While watching the video, you left and paused it. Even when paused, the video file is cached, i.e. saved to a buffer. Accordingly, Internet traffic is consumed throughout the entire video download
3. Tip 3. A free application can eat traffic. Often, advertisements are broadcast along with the download of some applications. Your traffic may be consumed by it
4. Tip 4. Choosing a method to access the Internet is easy. If you travel abroad and want to use the Internet, just connect Wi-Fi. And if you want to hide from civilization, then turn off data reception and transmission on your smartphone. Including disabling the e-mail client and other programs that access the Internet automatically

Video: How to set up the Internet?

There are still corners of the planet where the benefits of civilization have not reached, such as the Internet, for example. But every day the number of users of the World Wide Web is growing inexorably. Because there is also a mobile phone with its capabilities mobile internet And Wi-Fi access. If you want to connect to the Internet on your phone, use the following information.

By the way, it is very convenient to activate the Internet connection using the quick access panel, where the buttons for turning on mobile Internet and Wi-Fi are located.